Moisture-proofing paint: How do you protect the walls of your home from moisture problems?

 

Ways to protect walls from moisture

Many of us in our homes are exposed to the problem of moisture in the interior walls of our house, which appear in the form of large and expanding spots that cause the exterior paint peel to fall off and the wall becomes on the bricks it was built with or even the cement mortar, which distorts the general view of the place and causes embarrassment and inconvenience to the owners of the place in front of the guests and for this reason. The Excellence website was keen to provide some advice that would help in reaching a solution to this problem

Getting rid of moisture from the walls

What are the causes of moisture in the walls?

There are many reasons that lead to a moisture problem in walls, including:

First, there is a leakage of wastewater or drinking water passing through special pipes, which occurs as a result of damage to those pipes, and as a result, water leaks onto the walls.

Secondly, there is damage to the valves or skin of the taps that control their closure and prevent water from dripping, as the walls absorb them and create moisture.

Thirdly, closing the place for a long period without ventilating it and not introducing fresh air into it leads to the occurrence of great humidity in the place.

Fourthly, there is water leakage from the roofs that result from accumulations of rain water or water leaking from the tank, as the ceilings and walls absorb this water and create moisture.

How is the problem of moisture in walls faced and what are the ways to solve it????

Roof moisture treatment

There are some steps that must be followed to ultimately find a radical solution to the problems of water leaks that result in moisture in the walls. There are also some measures that, if taken, will never expose you to the problem of moisture in your place.

When you purchase plumbing basics and raw materials that are used to prepare a space, whether for kitchens or bathrooms, you must choose well-made products of known origin and a warranty against manufacturing defects. No matter how expensive they are, they will protect you from the problem of being exposed to leaks in the future, resulting in moisture in the walls and other more severe problems.

Pay attention to making insulation against moisture, which is applied in bathrooms and kitchens before the tiling stage. This is done using gypsum board materials, that is, a mixture of gypsum with silicone and fiberglass, which works to create an anti-humidity layer and helps prevent it from transferring to the walls adjacent to those parts of the house.

Moisture resistant paint

Insulating surfaces against water and moisture, as many ceilings and walls are damaged by such leaks. Therefore, we must resort to insulating them using drops and asphalt, or using rock wool panels covered with cement, which acts as a heat insulator and prevents the occurrence of moisture.

If the place is available for restoration due to the large number of cracks and fissures in it, you must immediately repair and maintain the place and block all those outlets that increase the level of humidity in the place.

If you are afraid of a rise in the humidity level of the walls adjacent to the bathroom or kitchen, then before painting, brush the walls with hysilica gel, which protects against moisture reaching the paint, which causes it to peel and fall.

There are some basic recommendations, such as making sure to constantly ventilate the place, especially the bathroom, after showering, because water vapor spreads in it, which condenses and increases the humidity level. Also, fans must be used to ventilate the place that is not well ventilated, and this is to reduce humidity: And do not forget to renew the paint for the doors, windows, and walls if necessary.

There are some tricks to get rid of moisture, such as spreading coarse salt near places of high humidity, as it works to pull it out. Charcoal also pulls out moisture and reduces its percentage.

Solve the problem of ceiling moisture

Solving the problem of ceiling moisture is one of the easy ways to get rid of the look of unsightly ceilings. When you are exposed to moisture in the upper floor and you find the paint peeling and not sticking to the ceilings, there is water leaking inside, it must be disposed of immediately and of course in that case you need to A definitive treatment, and you must contact a plumber so that he can fix the water problems in the floor above you, because without solving the problem the problem will not be solved, and if you put paint or even wallpaper, it will disintegrate after a period of time, so the solution is the following:

• If there are tanks.
• In this case, the tank must be repaired.
• After that, it must be ensured that the tank does not leak again.
• The process of treating ceilings begins from above by applying polymeric materials, which are the best in covering cracks in ceilings.
• After that, you can use a putty knife to peel off any paint that is not serious.
• After that, you can use paste to repaint the ceiling.
• After that, you can use white glue and paste wallpaper on the ceilings.
• You can make a layer of plaster on top and give it any paint you prefer that matches the decor of the place.

Treatment of dampness in the ground floor

Treatment of dampness in the ground floor can be done in very easy and simple ways by placing insulating materials with the foundation, but if construction has already been completed and you find that the floors swell and the tiles disintegrate, in that case you need the process of insulating the floors. You must contact trained technicians so that it is completed. Do these things:

• The floors must be broken.
• A layer of black insulation, which is butamine, must be applied.
• The insulator is left for several days and applied in several layers.
• When placing the insulation, the floors must be cleaned well and made sure that there are no problems with the drainage pipes. It is best to change them if there is a problem.
• After that, the sides are covered and the insulation material is patched to the floor covering at a distance of 10 cm so that there is no leakage.
• After insulation, a quantity of water is placed and a mark is placed to ensure that no water leaks into or into the place.
• Then, when you check on the place, you can remove the flooring.

Peeling wall covering

Cover the peeled wall using wallpaper, but you must isolate moisture in this case. You can use a set of tools and materials that help in covering the wall, and you must do the following:

• First, you must peel the wall well.
• A piece of nylon plastic can be used along the wall.
• A gun is used to spray the wall with plastic.
• The plastic sheet is placed on the spray materials.
• The area is sprayed again.
• It is left to dry and thus the wall is completely separated from any source of moisture and any moisture problem is corrected.
• After that, wallpaper or even paint is applied.

You can contact Al-Tafawuq Company now so that a full team of technicians can be connected to solve the moisture problem immediately.

Ways to protect walls from moisture

Ways to protect walls from moisture. If you are looking for the latest methods to protect walls from moisture, you must insulate the floors and walls, as this is the safe means by which the wall is preserved. It is known that if the walls are afflicted with problems such as: water leakage, the paint disintegrates and falls on the surface. Floors, which causes a big problem, and you can avoid this problem by doing the following:

• All water problems, whether sewage or drinking water supply, must be repaired.
• A painting teacher with experience in dealing with paints must be employed so that the wall is cleaned after the plastering process and prepared for painting.
• When there is paint that is disintegrating, you can remove it and use polyester, which is attached to the walls with the paint, and the walls are re-sprayed and any paint is used.
• The process of insulating the walls preserves the paint, but the best solution is to get rid of moisture problems.

Ways to protect walls from moisture

Ways to protect walls from moisture: When there are kitchen walls and you find that ceramic tiles are subject to falling, then there is a problem with the water supply in the walls. In that case, you must contact a professional plumber so that the problem is fixed and the appropriate maintenance process is carried out, after which the wall restoration process begins, which It is done as follows:

• In the beginning, traces of breakage and excavation are eliminated until the water pipes are changed.
• A ceramic similar to the old one is chosen.
• We are working on using polymeric materials to glue the ceramic.
• Of course, by using insulating materials, the wall is protected.
• It is best to use high-quality plumbing materials so that they are not exposed to holes.

• How to get rid of moisture from walls

  How to get rid of moisture from the walls. It is possible that the problem of damage to the walls is salts, not water, as a result of the house being in an area with high humidity as a result of the weather. In that case, the wall must be treated using the correct methods, which are done as follows:

  • Drilling is done in the wall and the old paint is removed.
  • A hammer is used until the wall is dropped by a distance of more than 1 cm.
  • After that, gypsum is used instead of cement to plaster the wall.
  • Ironed gypsum is the best quality for these places, as it works to absorb any salts that may form as a result of the climate.
  • After that, putty is applied and the wall is repainted.

  What is the best solution to treat moisture in walls?

  The ideal solution for getting rid of moisture could be to install foam boards, as they are one of the boards that work to give a beautiful shape to the walls and also get rid of moisture at the lowest costs. In that case, these methods must be followed, but first if there is moisture coming from it. Water seeping from the tank will not go away, of course, but the problem must be fixed at the top, and then the foam panels must be installed:

  • The wall is cleaned of any impurities and traces of fallen paint.
  • Different foam boards are used, which are in keeping with the nature of the place.
  • Triple foam boards can be used.
  • You can work on placing the board on the wall and then get rid of the adhesive layer.
  • The foam is glued well and then pressed.
  • The panels are installed next to each other and in the end you will get an excellent looking wall.

  Moisture resistant paint

  Methods of protecting walls from moisture vary according to the place of occurrence. There is no doubt that a large number of residents suffer from the problem of moisture in their homes, whether in the ceilings or walls, for a reason they do not know, but the reasons behind the moisture that occurs are considered to be water leaks in the walls and ceilings that lead to the accumulation of an amount of water. As time passes, it causes contemplation of the concrete layers, expelling the paints and falling behind them, leaving an inappropriate appearance that makes the owners of the place feel out of place in front of their guests, but there are solutions to this problem, and all of them are a quick and annoying mess that will save you from the problem of humidity and the bad appearance that occurs in the walls, and among the causes of moisture in the walls, there are many reasons. Which results in dampness and an undesirable appearance in the walls, ceilings and ground floors. The fault may be chronic, that is, the walls are affected by it over a long period of time. It may also be short-term, but depending on the cause of the dampness and peeling, the problem needs quick treatment to prevent further peeling in the walls. Inappropriate shape and among the reasons that cause dampness in some people are the following:

  • Severe water leaks from bathrooms and kitchens, which accumulate for a long time and cause damage to reinforced concrete parts.
  • The house and walls do not have the appropriate degree of ventilation, such as when the house is closed for a long time and no air enters it.
  • The presence of rainwater collecting on the roofs, in turn, seeps into the ceilings and causes the problem of roof rot and dampness, which results in a discolored appearance on colored and white ceilings.
  • Due to fractures in the pipes in the walls, this causes water to come out of them and the walls absorb this water, causing moisture to form.
  • A problem occurs in the home plumbing network as a result of not properly installing pipes or relying on people who are not specialized in home plumbing.
  • This may be due to failure to insulate the surfaces after plumbing the house. Leaks may occur if one of the existing pipes breaks.

  Salinity treatment of walls

  Perhaps you are looking for ways to protect walls from moisture. This problem has become one of the problems that needs urgent treatment to prevent it from causing more embarrassment in your home in front of guests, as there are many ways to protect walls from moisture, and there are also companies and people who specialize in treating the problem if it occurs, but in order to stay away. To find out the secret of the problem and not cause it to occur in the first place, you must follow the following methods:

  • Use plumbing components at home from known sources and of good manufacture that are not easily damaged. If the price increases, there is no problem.
  • When creating a drainage and plumbing network in your home, do not rely on non-specialists, but only rely on plumbing technicians.
  • Always notice water leaks in your home and make sure to always close the valves to eliminate any problem that prevents maintaining the humidity of the house.
  • When leaks occur in ceilings, materials must be used to prevent them through waterproofing, which is done using various materials that prevent the accumulation and transmission of water.
  • The insulation process must be an essential process before painting and before bonding. There are different types of insulators that are suitable for tiled floors.
  • Use the best materials when painting walls, and use paint that resists leaks, as it prevents them in the first place, and all of this is from well-known companies.
  • If you find your home suffering from a little moisture, immediately start looking for help from someone who specializes in plumbing and painting.

  Insulating walls from water

  Methods of eliminating moisture from ceilings, which are followed by large companies, contribute to eliminating moisture from the ceilings of your homes. This results from the presence of water in the ceilings for some reason, which is usually related to water leaks from the tanks and may affect the white cement and ceiling putty. This first leads to the white color changing to a dark color as a result of the walls rotting due to the presence of this water, followed by the presence of holes in the ceilings from which paint falls to appear. The first layer of cement becomes of an inappropriate shape, so there is a funny thing about it and you all have this problem, such as:

  • The ceilings are completely peeled off using the plastic knife used by the painter until the surface layers are then removed.
  • Putty is applied to the ceilings first, and white putty must be applied instead of cement, and types that resist leakage must be used.
  • Polymers that prevent leaks in ceilings are applied to the layers of putty and left to dry on the walls to be primed afterwards.
  • They use paints with a high degree of resistance to leaks to put them on the ceilings, and only specialists do this.
  • But before doing this, there must be a final solution that prevents leaks from roofs and the passage of water into ceilings.
  • Sometimes the paint is not used to paint the ceiling again, but instead colored plastic sheets are placed on the surfaces and glued to a specific effect.

  Treatment of moisture in walls by burning

  Moisture also occurs in walls, especially the walls of kitchens and bathrooms, because they are highly susceptible to water leaks in bathrooms and kitchens, causing signs of paint loss and cracks in the walls to appear in a way that distorts the appearance of the wall. However, there are methods that treat the bad shape that the walls are in after the leak occurs, and large companies follow them. Specialized in this or painting technicians, and the available methods include the following:

  • The place where moisture occurred for a long time is left to get ventilation by opening windows and turning on fans and air conditioners.
  • Use tools to completely peel off the wall that has been exposed to moisture so that it becomes facing, so that what is done is done by ventilating the place for a long time.
  • It is possible to use panels of insulating foam next to each other in a specific shape and with a good appearance, which may serve the purpose as an alternative to paint.
  • Sometimes it is possible to pay attention to applying a putty of asphalt, then leave it to set and apply the putty that resists leaks on these walls.
  • Use oil or plastic paints as you wish and apply them to damaged walls caused by water moisture.
  • The specialist in this matter is interested in eliminating the problem from its roots, that is, identifying the cause that led to the leak and preventing it, such as plumbing, and so on.
  • Colored wallpaper can be used as an alternative to paint.